ES Compleat™ OAT Coolant

Achieve service intervals of 500 000 km or 6 000 hours with Fleetguard’s^® ES Compleat™ OAT from HFT.

Designed for use in all diesel, petrol and natural gas engines, ES Compleat™ is compatible with gaskets, elastomers and other non-metallics in the engine.

The antifreeze product optimises cooling system performance and water pump life, incorporates propriety scale inhibitors and offers additional advantages:

Antifreeze and anti-boil protection
Superior liner pitting and corrosion protection
Superior aluminium and solder protection
Compatible with all other antifreeze/coolants
Available in concentrate 50/50 and 60/40

ES Compleat™ OAT is compatible with chemical-free ES water filler and is easily maintained with OAT extender, which replaces the additives depleted in the prior service interval.

Easy to use test strips help monitor glycol and additive levels providing protection against coolant dilution.

Multiple benefits for a range of equipment

From lowest cost to extended service intervals, from glycols to glycerine, these products are formulated by engine experts to provide exceptional protection over the life of your equipment.

ES Compleat OAT	Equipment	OEM Specification / Performance Level
Organic acid fully formulated extended life coolant (antifreeze) for use in all heavy-/light-duty diesel, natural gas and gasoline engines. Life-of-the-Engine, 1,000,000-mile (20,000 hr) coolant.* Protects against liner pitting, and provides solid corrosion protection for aluminum, cast iron, copper, brass and solder. Contains proprietary scale inhibitors. Compatible with gaskets, elastomers and non-metallics, including silicon seals/hoses. OEM-approved formulation free of nitrite, amine, phosphate, borate, silicate and 2-ethylhexonic acid. Compatible with non-chemical lters. Available in Ethylene Glycol-based 50/50, 60/40 premix or concentrate. Meets ASTM D3306, ASTM D6210, TMC RP 329.	Caterpillar Cummins Detroit Freightliner Navistar Volvo Case New Holland PACCAR Mack John Deere	EC-1 CES 14603 93K217 48-25878 CEMS B1-Type IIIA 20774185 MAT 3620 CSO185 014617004 8650-4

ES Compleat OAT

Equipment

OEM Specification / Performance Level

Organic acid fully formulated extended life coolant (antifreeze) for use in all heavy-/light-duty diesel, natural gas and gasoline engines.
Life-of-the-Engine, 1,000,000-mile (20,000 hr) coolant.*
Protects against liner pitting, and provides solid corrosion protection for aluminum, cast iron, copper, brass and solder.
Contains proprietary scale inhibitors. Compatible with gaskets, elastomers and non-metallics, including silicon seals/hoses.
OEM-approved formulation free of nitrite, amine, phosphate, borate, silicate and 2-ethylhexonic acid.
Compatible with non-chemical lters.
Available in Ethylene Glycol-based 50/50, 60/40 premix or concentrate.
Meets ASTM D3306, ASTM D6210, TMC RP 329.

Caterpillar

Cummins

Detroit

Freightliner

Navistar

Volvo

Case New Holland

PACCAR

Mack

John Deere

EC-1

CES 14603

93K217

48-25878

CEMS B1-Type IIIA

20774185

MAT 3620

CSO185

014617004

8650-4

*To maintain the protection provided by Fleetguard coolants, the proper level of inhibitor must be present. This can usually be achieved by topping off the cooling system with premixed Fleetguard coolant.

The user is responsible for ensuring proper additive levels and coolant pH through the use of test strips and the addition of additives or new coolant if necessary. The recommended test intervals are as follows:

OAT coolants – 300,000 miles, 6,000 hours or 1 year
Hybrid coolants – 150,000 miles, 4,000 hours or 1 year
Conventional coolants – Every oil drain interval or 1 year

The shortest of recommended hours, miles or 1 year should be used as the test interval. The test interval is a precautionary recommendation intended to prevent maintenance and engine problems from causing progressive, severe engine damage.