Tightening Spindles

Tightening Spindle with Angle Head

• For high accessibility
• Also available with integrated measurement transducer

Tightening Spindle with Offset Output Drive

• For side-by-side arrangement with small center-to-center distances
• Also available with integrated measurement transducer

Tightening Spindle with Transverse Gearbox

• Compact length
• Available for all sizes

Tightening Spindle with Feed Output Drive

• Integrated feed movement
• For use in connection with automatic bolt supply

Tightening Spindles Size 2 Angle Head

To ensure trouble-free operation, the angle head must always be operated with an output drive axial compensator, e.g., a spindle bearing.

• Working range of 2.2 - 11 Nm
• Max. output drive speed of 1 000 rpm
• For restricted accessibility
• Precision toothing for high torque accuracy
• Incremental positioning (45° increments)
• Integrated fastening flanges

Tightening Spindles Size 2 Feed Output Drive

• Working range of 0.6 - 10 Nm
• Max. output drive speed of 1 000 rpm
• Integrated feed movement
• In connection with automatic bolt supply
• Standard tool mounts & compressed air connections

Tightening Spindles Size 3 Spindle Bearing

• Working range of 1.7 - 56 Nm
• Max. output drive speed of 740 rpm
• Various lengths with axial compensator
• Precision toothing for high torque accuracy
• Standard tool mounts
• Maximum efficiency

Tightening Spindles Size 3 Offset Output Drive

• Working range of 1.7 - 53 Nm
• Max. output drive speed of 740 rpm
• For tight hole templates
• Standard tool mounts

Tightening Spindles Size 3 Offset Output Drive with Integrated Measurement Transducer

• Working range of 3.2 - 57 Nm
• Max. output drive speed of 740 rpm
• Reduced center-to-center distances
• Torque measurement directly at the bolt
• Proximity switching digital measurement transfer
• Efficiency fluctuations do not affect measurements

Tightening Spindles Size 3 Angle Head

• Working range of 5.4 - 90 Nm
• Max. output drive speed of 705 rpm
• For restricted accessibility
• Precision toothing for high torque accuracy
• Incremental positioning (9° increments)
• Integrated fastening flanges
• With integrated measurement transducer on request

Tightening Spindles Size 3 Feed Output Drive

• Working range of 1.7 - 53 Nm
• Max. output drive speed of 740 rpm
• Integrated feed movement
• In connection with automatic bolt supply
• Standard tool mounts & compressed air connections
• Maintenance-free for 1 million full-load cycles

Tightening Spindles Size 4 Spindle Bearing

• Working range of 50 - 500 Nm
• Max. output drive speed of 1 000 rpm
• Various lengths with axial compensator
• Standard tool mounts
• Maximum efficiency

Tightening Spindles Size 4 Feed Output Drive

• Working range of 6 - 138 Nm
• Max. output drive speed of 1 000 rpm
• Integrated feed movement
• In connection with automatic bolt supply
• Standard tool mounts & compressed air connections

Tightening Spindles Size 4 Offset Output Drive with Integrated Measurement Transducer

• Working range of 15 - 342 Nm
• Max. output drive speed of 1 000 rpm
• Reduced center-to-center distances
• Torque measurement directly at the bolt
• Proximity switching digital measurement transfer
• Efficiency fluctuations do not affect measurements

Tightening Spindles Size 4 Angle Head

• Working range of 26 - 220 Nm
• Max. output drive speed of 985 rpm
• For restricted accessibility
• Precision toothing for high torque accuracy
• Incremental positioning (10° increments)
• Integrated fastening flanges
• With integrated measurement transducer on request

Tightening Spindles Size 4 Feed Output Drive

• Working range of 6 - 340 Nm
• Max. output drive speed of 1 000 rpm
• For tight hole templates, side-by-side arrangement with small center-to-center distances
• Standard tool mounts

Tightening Spindles Size 5 Spindle Bearing

• Working range of 50 - 500 Nm
• Max. output drive speed of 515 rpm
• Various lengths with axial compensator
• Standard tool mounts
• Maximum efficiency

Tightening Spindles Size 5 Offset Output Drive

• Working range of 50 - 1 000 Nm
• Max. output drive speed of 515 rpm
• For tight hole templates
• Standard tool mounts

Spindle Angle Heads with or without Stroke

• Suitable for size 4 & 5 tightening spindles on request

Spindle Angle Heads with Integrated Measurement Transducer

• On Request

Spindle Angle Heads with Hold and Drive

• On Request

Block Output Drives

• On Request

Socket Trays

• On Request

Programm Selector Switch

• On Request

Feed Grippers

• On Request

Telescopic Suspension

• On Request