Electronic Temperature Sensors

Compact and robust, the Hydac range of electronic temperature sensors caters for hydraulic applications at up to 600 bar, and up to 100 °C.

  • Electronic Temperature Sensor | ETS 300
  • Electronic Temperature Sensor | ETS 1600

Electronic Temperature Sensor | ETS 300

  • Technical data:
  • Measuring range: -25to 100 °C (-13 to 212°F)
  • Pressure resistance: 600 bar
  • Hydraulic connection: G1/2ADIN 3852
  • Torque rating: approx. 45 Nm
  • Parts in contact with medium: stainless steel
  • seal: FPM

The ETS 300 is a compact electronic temperature sensor with digital display. Two different models are available for optimum adaptation to particular applications.

The ETS 300 with built-in temperature sensor has a measuring range from -25 °C to +100 °C. It is pressure-resistant to 600 bar and can therefore be mounted directly on the hydraulic block, if required.

The model with a separate sensor input has a display range of -30 °C to +150 °C. The unit is mainly used together with the temperature sensor TFP 100 which was specially developed for tank mounting. However, commercially available PT 100 temperature sensors can also be used. Different output models with one or Iwo switching outputs, optionally with an additional analogue output signal 4 to 20 mA, offer a variety of application possibilities.

The switching points and the associated hystereses can be adjusted very quickly and easily via the membrane keypad. For optimum adaptation to the particular application, the unit has many additional adjustment parameters (e.g. switching delay times, N/C / N/C function of the outputs).

Special features:

  • Compact temperature sensor with integral or separate temperature sensor
  • 2 transistor switching outputs, output capacity 1.2 A each
  • Option: analogue output 4 to 20 mA
  • Switching point function or window function
  • Many useful additional functions

Electronic Temperature Sensor | ETS 1600

  • Temperature range: 0 to 100 °C
  • Display range: 0 to 100 °C
  • 3–digit temperature display: in °C
  • Accuracy: Better than 1.0 °C

Special features:

  • 4 adjustable value contacts with relay output switching points and switch–back differential are freely adjustable, without opening the unit switch–back differential
  • 0.5 to 20 °C switching point display via key command at any time without affecting the performance
  • Analogue output optionally 4 to 20 mA or 0 to 10 V safety type IP 65 can be combined with the pressure switch EDS 1600 of the same design.
  • PT 100 temperature sensor separately connected via a cable in the tank mounted immersion tube (4–conductor technique).

Speak to our filtration technology division about your factory automation requirements.

CONTACT US

Need more info?

Send us your requirements:


I agree to receive Bosch Rexroth Africa training and event information

LATEST NEWS

10 April 2025

Kicking off 2025 with our 1st newsletter

This edition highlights expos, training solutions & community support.

Read More >
9 January 2025

2025 Hydraulic & Pneumatic Training Calendar

Advance your career with MerSETA-accredited courses for all skill levels.

Read More >
3 December 2024

Reflecting on the highlights of 2024

2024 highlights and recaps available in our newsletter.

Read More >
27 November 2024

Hytec South Africa donates safe sanitation facilities

We installed dignified sanitary stations for children and staff at a KZN school.

Read More >

Read more of the Group’s latest news here.

We use cookies to improve your experience on our website. By using our site you agree to Cookies Policy