2-Way Control Valves

Providing exceptional bi-directional flow control, the Bosch Rexroth range from Hytec South Africa caters for pressures of up to 315 bar, and for flow rates between 32 and 160 litres per minute.

View the detailed specifications below.

Speak to our hydraulics division about your factory automation

CONTACT US

Need more info?

Send us your requirements:


I agree to receive Bosch Rexroth Africa training and event information

2 Way Control Valve specifications

2 Way Flow Control Valve, Sandwich Type | Z2FRM (NG6)

  • Maximum operating pressure 315 bar
  • Maximum flow 32 l/min
  • Sandwich plate valve
  • Porting pattern according to DIN 24340 form A
  • Porting pattern according to ISO 4401-03-02-0-05 (with locating hole)
  • With 1 or 2 flow control cartridges
  • Adjustment type with internal hexagon

 
2 Way Flow Control Valve | Type 2FRM - Series 1X (Sizes 6 and 10)

  • Maximum operating pressure 315 bar
  • Maximum flow 60 l/min
  • Cartridge valve
  • Adjustment element with internal hexagon
  • With built-in check valve
  • Low start-up jump

 
2 Way Flow Control Valve | Type 2FRM - Series 3X (NG6)

  • Maximum operating pressure 315 bar
  • Maximum flow 32 l/min
  • Location of the ports according to DIN 24340 form A
  • External closing of the pressure compensator, optional
  • Threaded connection for panel mounting with connection thread G3/8
  • Check valve, optional
  • 2 adjustment types, optional: Rotary knob with scale and lockable rotary knob with scale

 
2 Way Flow Control Valve | Types 2FRM, 2FRH and 2FRW (Sizes 10 and 16)

  • Maximum operating pressure 315 bar
  • Maximum flow 160 l/min
  • Porting pattern to DIN 24 340 Form G, ISO 6263 and CETOP–RP 121 H
  • Mechanical operation (type 2FRM)
  • Hydraulic operation (type 2FRH)
  • Electro-hydraulic operation (type 2FRW)
  • Pressure compensator stroke limiter, optional
  • Start-up jump reduction
  • Adjustable stroke limiter for the rack and pinion actuator (types 2FRH and 2FRW)
  • Flow control in both directions using a rectifier sandwich plate

LATEST NEWS

16 November 2022

New: tailored manifold manufacturing!

Hytec Engineering now custom-manufactures hydraulic manifolds!

Read More >
8 November 2022

Ian Kidson retires from Hytec South Africa

Our renowned repairs expert has retired after 31 years of dedicated service.

Read More >
1 November 2022

Hägglunds at MTE Northern Cape

Read more about our successful expo where we displayed our VSDs.

Read More >
19 October 2022

New Branch Manager at Hytec Secunda

Meet Hytec SA's new Secunda Branch Manager, Jaco Smit!

Read More >

Read more of the Group’s latest news here.

We use cookies to improve your experience on our website. By using our site you agree to Cookies Policy