Multi Station Manifold Blocks
Perfect for hydraulic valves in a range of applications, the Bosch Rexroth range is exclusively available from Hytec.
View product details below and call us today for more information and pricing.
Subplates specifications
Multi Station Manifold Blocks | Type HSR 06 (NG6)
- Nominal size: 6
- Component series: 2X and 3X
- Maximum operating pressure: 315 bar
Features:
- Multi-station manifold blocks form the basis for ready to connect, as vertical stacking assembles, control circuits
- Very compact hydraulic circuits can be built-up on each axis, using vertically stacked sandwich plate valves in combination with NS6 directional control valves or proportional valves.
- All circuits have a common pressure and tank port which are positioned on each end of the manifold.
- Each control station has separate actuator ports A and B, which can be on the side (version C) or on the underside (version D) as required.
The following are available as vertical stacking assemblies:
- Pressure reducing valve ZDR to RE 26570
- Pressure relief valve ZDB to RE 25751
- Double check valve Z2S to RE 21548
- Check valve Z1S to RE 21533
- Double throttle check valve Z2FS to RE 27506
- Pressure switch HED 8 to RE 50060
- Sandwich plates to RE 48050
Directional valve:
- Electrical operation, type WE to RE 23178
- Fluidic operation, types WH and WP to RE 22282
- Mechanical, manual operation, type WM… to RE 22280
Proportional valve:
- Direct operated, without feedback, type WRA toRE 29055
- Direct operated with electrical feedback, type WRE to RE 29061
Multi Station Manifold Blocks | Type HSR 10 (NG10)
- Nominal size: 10
- Component series: 1X and 3X
- Maximum operating pressure: 315 bar
Features:
- Multi-station manifold blocks form the basis for ready to connect, as vertical stacking assemblies, control circuits.
- Very compact hydraulic circuits can be built-up on each axis, using vertically stacked sandwich plate valves in combination with NS10 directional control valves proportional valves.
- All circuits have a common pressure and tank port which are positioned on each end of the manifold block.
- Each control station has separate actuator ports A and B, which can be on the side (version C) or on the underside (version D) as required.
The following are available as vertical stacking elements:
- Pressure reducing valve ZDR to RE 26585
- Pressure relief valve ZDB to RE 25761
- Double check valve Z2S to RE 21553
- Check valve Z1S to RE 21536
- Double throttle check valve Z2FS to RE 27518
- Pressure switch HED 8 to RE 50060
- Sandwich plates to RE 48052
Directional valve:
- Electrical operation WE to RE 23327
- Mechanical, manual and fluidic operation types WM., WP, WH. and WN to RE 22331
- Pilot operated WEH 10 to RE 24751 1)
Proportional valve:
- Direct operated, without feedback type WRA to RE 29055
- Direct operated with electrical feedback type WRE to RE 29061
- Pilot operated, without feedback type WRZ/WRH to RE 29115 1)
Speak to our hydraulics division about your factory
automation
CONTACT US 
