Manual Directional Valves
Lever, fluidic, mechanical and combination manual directional valves are available from Hytec South Africa and Bosch Rexroth. For more information on each model available, contact us today to speak with a consultant.
4/3 and 4/2 Directional Valve with Hand Lever Actuation | Type 4MM (NG16 to NG32)
- Maximum operating pressure 350 bar
- Maximum flow 450 l/min
- Direct operated directional spool valve with hand lever actuation
- Porting pattern to DIN 24340 Form A and ISO 4401
- With spring return or detent, optionally
- Actuating mechanism is protected against contamination and ingress of humidity
- Head piece with actuating mechanism can be replaced without having to disassemble the valve
- Inductive position switches and proximity sensors (contact-free and floating)
4/3, 4/2 and 3/2 Directional Valve with Mechanical Actuation | Type WMR, WMU, WMM, WMD(A) and WMRZ (NG6)
- Maximum operating pressure 315 bar [4569 psi]
- Maximum flow 60 l/min [15.8 US gpm]
- Direct operated directional seat valve
- Porting pattern according to DIN 24340 form A (without locating hole)
- Porting pattern according to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03 (with locating hole)
- Inductive position switch and proximity sensors (contactless)
Actuating elements:
- Roller plunger
- Handle-operated lever
- Rotary knob
4/3, 4/2 and 3/2 Directional Valve with Fluidic Actuation | Type WP and WH (NG6)
- Maximum operating pressure 315 bar [4569 psi]
- Maximum flow 60 l/min [15.8 US gpm]
- Direct operated directional spool valve
- Types of actuation: Pneumatic (WP, WPZ) and Hydraulic (WH, WHZ)
- Porting pattern according to DIN 24340 form A (without locating hole)
- Porting pattern according to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03 (with locating hole)
- Inductive positions witch and proximity sensor (contactless)
4/3, 4/2 and 3/2 Directional Valve with Mechanical, Manual and Fluidic Actuation | Type WM., WN, WP and WHD (NG10)
- Maximum operating pressure 315 bar [4569 psi]
- Maximum flow 120 l/min [31.7 US gpm]
- Direct operated directional spool valve
- Porting pattern to ISO 4401-05-04-0-05, NFPA T3.5.1 R2 and ANSI B93-7 D05
Type of actuation:
- Roller plunger
- Hand lever
- Rotary knob
- Pneumatic
- Hydraulic
Speak to our Hydraulic Coolers about your factory
automation
CONTACT US 
