Contamination Monitoring

Hydac has developed a range of 36 contamination monitoring products that ensure accurate monitoring and capturing of contamination levels during the filtration process. Whether using drive units, hydraulic filters, accumulators, valves, clamps, electronics and other components and consumables, Hydac products are supported extensively, forming a complete solution-based package.

Sensor Monitoring Unit SMU 1100

A compact control unit for displaying and storing measured values in a PC network. Measured values are stored on an interchangeable MMC memory card.

VIEW PRODUCT

AquaSensor AS 1000

The AquaSensor AS 1000 is a reliable, compact solution for online detection of water in oils, in particular as an OEM sensor for condition monitoring.

VIEW PRODUCT

Measuring Microscopes

Hydac measuring microscopes measure particles on filter membranes of oil samples to ensure optimal condition monitoring and filtration.

VIEW PRODUCT

Water Test Kits

For quantitative analysis of water content in percent by volume of mineral & lubricating oils. Displays as water content in percent by volume or ppm.

VIEW PRODUCT

PM-1 Particle Monitor

Recognise any contamination level changes in hydraulic and lube oil systems with on-line monitoring.

VIEW PRODUCT

Oil Condition Sensor HYDACLab HLB 1300

A multifunctional sensor for online condition monitoring of oils in stationary & mobile applications. Quickly identifies deteriorating conditions.

VIEW PRODUCT

Metallic Contamination Sensor MCS 1000

Monitor metallic particle contamination (ferromagnetic and non-ferromagnetic) in lubrication fluid by inductive measurement in the >100 μm size range.

VIEW PRODUCT

Hydac Sensor Display Unit SDU For Hydac HDA5500 And Hydac AS1000 AquaSensor

Monitor temperature and water saturation of oil as it enters and exits lubrication systems. Displays values through relay and analogue output signals.

VIEW PRODUCT

Fluid Sampling Set FES

The Hydac Fluid Sampling Set FES from HFT is designed for taking static and dynamic oil samples from hydraulic and lubrication systems.

VIEW PRODUCT

Fluid Analysis Set – FAS

Hydac’s FAS allows you to monitor contamination of oil samples from hydraulic and lubrication systems in terms of their solids contamination.

VIEW PRODUCT

Contamination Test Units

Hydac Contamination Test Units are used to determine the surface cleanliness of lightly contaminated components. Available through HFT.

VIEW PRODUCT

Contamination Test Modules

Easily analyse the technical cleanliness of components, and remove contamination from component surface, with samples from the washing fluid analysed

VIEW PRODUCT

Contamination Sensor Module CSM 2000

Online condition monitoring that detects particle contamination in hydraulic and lubrication fluids. Ideal for independent particle content analysis.

VIEW PRODUCT

Contamination Sensor Module CSM 1000

An online condition monitoring system for detecting particle contamination in hydraulic and lubrication fluids.

VIEW PRODUCT

Contamination Sensor CS 2000

A stationary sensor for continuous monitoring of particle contamination in fluids. It is ideal for dynamic trend measurement of the contamination.

VIEW PRODUCT

Contamination Sensor CS 1000

The Hydac Contamination Sensor CS 1000 is an online fluid sensor for continuous monitoring of particle contamination in fluids.

VIEW PRODUCT

Conditioning Module Reservoir Extraction CM-RE

The CM-RE is a self-priming motor pump unit that enables measurement of oil cleanliness in unpressurised reservoirs, tanks or leakage lines.

VIEW PRODUCT

Condition Monitoring Unit, CMU 1000

Hydac's CMU 1000 is an electronic evaluation unit designed for permanent online condition monitoring of hydraulic systems and machines.

VIEW PRODUCT

Condition Monitoring Interface Range

An all-purpose electronic instrument for converting the HSI signal from Hydac sensors into a standardised PC signal.

VIEW PRODUCT

AquaSensor AS 8000

The Hydac AquaSensor AS 8000 is designed for continuous online detection and measuring of the free water content in mineral and lubrication fluids.

VIEW PRODUCT

AquaSensor AS 2000

AquaSensor AS 2000 is designed for online measurement and indication of the percent of dissolved water in hydraulic fluids in addition to temperature.

VIEW PRODUCT

Fluid Control Unit FCU 2000

Hydac Fluid Control Unit (FCU) 2000 is a portable service instrument for measuring particle contamination in hydraulic and lubrication systems.

VIEW PRODUCT

Fluid Control Unit FCU 1000

Hydac's FCU 1000 is a portable service unit for short-term measurement of particle contamination, humidity and temperature of hydraulic systems' fluid

VIEW PRODUCT

Ptk1 Oil Analysis Patch Kit

Get an immediate visual analysis of contamination levels and contaminate types in your hydraulic & lubrication systems.

VIEW PRODUCT

Fluid Control Unit FCU 8000

The FCU 8000 measures particle contamination in hydraulic and lubrication systems in field applications and in laboratories and service centres.

VIEW PRODUCT

Find out more about contamination monitoring equipment

Need more info?

Send us your requirements:


I agree to receive Bosch Rexroth Africa training and event information

LATEST NEWS

10 April 2025

Kicking off 2025 with our 1st newsletter

This edition highlights expos, training solutions & community support.

Read More >
9 January 2025

2025 Hydraulic & Pneumatic Training Calendar

Advance your career with MerSETA-accredited courses for all skill levels.

Read More >
3 December 2024

Reflecting on the highlights of 2024

2024 highlights and recaps available in our newsletter.

Read More >
27 November 2024

Hytec South Africa donates safe sanitation facilities

We installed dignified sanitary stations for children and staff at a KZN school.

Read More >

Read more of the Group’s latest news here.

We use cookies to improve your experience on our website. By using our site you agree to Cookies Policy