Pneumatic Actuators

Omal Automation pneumatic actuators are accurately designed and engineered, and have a state-of-the-art production line dedicated to their fabrication. This pneumatic actuator range is specifically designed to reliably drive automation.

Stainless Steel Pneumatic Actuator

Omal stainless steel pneumatic actuators come in 4 variations and available in double acting and spring return double casting.


Spring Return Aluminium Actuator SRN

Designed for open and close valve operation and fail safe emergency. The range of 11 SRNs provide nominal torque from 15 to 960 Nm at 5.6 bar.


Heavy Duty Carbon Steel Pneumatic Actuators

Heavy-duty double acting & spring return actuators. Supply media for both of these actuators are filtered compressed air, inert gases & technical gas.


Carbon Steel Pneumatic Actuator

Comes in double-acting and spring return types. ATEX and SIL 3 certified to guarantee the highest level of functional safety.


Aluminium Actuator With Hand Wheel

Omal Automation Aluminium Actuator with Hand Wheel, can be integrated in double acting and spring return aluminium actuators.


Aluminium Two Stage DD Pneumatic Actuator

Ideal for filling and metering fluids or solids-mix materials with a special metering device. Can be used for fine or rough metering.


Double Acting Aluminium Actuator DAN

These Omal Automation double acting actuators are used for open and closed valve operation as well as cycle regulation.

Bosch Rexroth Africa brings the world’s leading hydraulics, pneumatics and automation brands to Africa!

Quality, no exceptions:

The quality of these pneumatic actuators is guaranteed with a thorough inspection. A quality inspection is carried out by onsite operators using certified tools and measuring equipment, before being double-checked in Omal Automation’s quality department using a computerised 3D touch-testing program.

Every single Omal Automation pneumatic actuator from Tectra Automation undergoes this thorough quality process before Tectra Automation takes ownership, passing on this quality guarantee to its customers.

Omal Automation pneumatic actuator applications:

Omal Automation pneumatic actuators are designed and manufactured to provide maximum performance in a wide range of applications throughout sub-Saharan Africa. These industries and applications include:

  • Automotive
  • Biogas
  • Chemical
  • Petrochemical
  • Energy and power generation
  • Food and beverage
  • Marine
  • Mining
  • Oil and gas
  • Steel works
  • Textile
  • Water and wastewater
Contact Tectra Automation today to find out which pneumatic actuator is best for your application.

Need more info?

Send us your requirements:

I agree to receive Bosch Rexroth Africa training and event information

Additional information on pneumatic actuators:

Double Acting Aluminium Actuator DAN: For open and closed valve operation and cycle regulation. Provides nominal torque of 8 to 1 920 Nm at 5.6 bar and there is less friction between piston and cylinder because of energised self-lubricating strips, which also extend actuator life.

Spring Return Aluminium Actuator SRN: 11 spring return pneumatic actuators in this range, which provide nominal torque of 15 to 960 Nm at 5.6 bar, and are designed for open and closed valve operation and fail safe emergency.

Heavy Duty Carbon Steel Pneumatic Actuator: Supply media comprises filtered compressed air, inert gases and technical gas, and both the double acting and spring return versions work on a Scotch yoke system with rolling friction.Their standard temperature range is from -20 to 80 °C and the high temperature range from -20 to 150 °C.

Aluminium Actuator with Hand Wheel: The hand wheel equips quarter turn pneumatic actuators with a manual emergency hand wheel. Material composition of stainless steel, steel alloy + Nitrilic Rubber, aluminium alloy, steel alloy, NBR and acrylic plastic translates to a long product life.

Stainless Steel Pneumatic Actuator: Available in 4 variations, this entire range is ATEX and SIL 3 certified. The double acting actuator precision casting has torque from 15 to 480 Nm, as does the spring return version. The double acting from bar actuator provides torque from 720 to 1 920 Nm and the spring return from bar is 360 to 960 Nm.

Carbon Steel Pneumatic Actuator: ATEX and SIL certified, torque for both the double acting and spring return versions are from 360 to 960 Nm. Compressed air is the operating media, not necessarily lubricated, with an air supply of 5.6 bar to a maximum of 8.4 bar.

Aluminium Two Stage DD Pneumatic Actuator: Designed to prevent the actuator from achieving a full rotation by using 2 additional cylinders with inner piston that stop the rotating angle at a pre-set position.Their material composition makes them ideal for temperatures from 0° to 80 °C, and with dry air the range increases to -20° to 80 °C.


1 March 2023

Hägglunds newest product wins industry recognition!

Hägglunds Fusion named NED’s 2022 Innovation Award winner

Read More >
24 February 2023

Hytec participates in Sasolburg roadshow

Leading hydraulic solutions on display, alongside range of Bosch power tools.

Read More >
15 February 2023

Managerial appointment strengthens Bosch Rexroth South Africa Group

Managerial appointment strengthens Bosch Rexroth South Africa Group.

Read More >
12 February 2023

Meet our first distributor in Botswana!

DWD Solutions now supports our operations in the country.

Read More >

Read more of the Group’s latest news here.

We use cookies to improve your experience on our website. By using our site you agree to Cookies Policy